Dremel 7000 Instrucciones De Funcionamiento Y Seguridad página 13

1600A012FR_7000 2/1/17 10:10 AM Page 13
Releasing and inserting battery Pack
Remove the battery pack from the tool by squeezing
the two tabs on the battery pack together and slide the
battery pack out of the tool.
Inserting batteries
1. Remove battery pack cover from the battery holder
by squeezing the two tabs and remove the battery
cover from the battery holder.
BATTERY PACK
COVER
BATTERY
HOLDER
2. Paying special attention to the orientation of the
batteries, insert four AA batteries into the battery pack
cover. Note diagram on the battery holder showing
correct battery direction.
3. Align arrow in battery pack cover with arrow in the
battery holder and press together. The two parts will
only fit together when the arrows are aligned. The two
parts will join together with a click.
BATTERY
PACK
RELEASE
TAB
BATTERY
HOLDER
4. Insert the battery pack into the tool by aligning the
guide ribs on the battery with the guide track on the
tool. The two parts will only fit together when the two
BATTERY
arrows align. The two parts will join together with a
PACK
click.
COVER
RELEASE
TABS
may explode or leak.
13
BATTERY
PACK
COVER
GUIDE TRACK
RISK OF FIRE USE 1.5V
ALKALINE BATTERIES ONLY.
Do not install backwards,
charge or put in fire. Batteries