ELTRA Profile SEMPRE Manual De Instrucciones página 21

1
PROGRAMMING
A
B
BEEP BEEP
♫ ♫
C
NOTE :
When you replace or remove the batteries from the bell unit please always re-follow the above
steps to programme the bell.
2
DELETE PROGRAMME
To delete a programme, remove the bell from the electrical socket and remove the batteries from
the button(s). Press the button for 10 seconds. Leave both for 30 seconds.
3
PROGRAMMING MULTIPLE BELLS
Repeat steps 1A - 1C for all bells. Do this per bell in order to avoid interference.
735009155_IM_V1 - FOTO.indd 21
Access the button by pressing in the tab on the side and
removing the insulating strip.
Plug the bell into an electrical socket. The bell will not
make a sound. The bell is ready to learn and memorise the
digital code.
Within a minute, push the button. The bell will play a ring-
tone. It is now programmed. Leave it for 5 minutes before
reusing it.
UK
13-2-2014 15:18:23