Status At First Switch-On; Startup Wizard - Monacor IOR-204 Manual De Instrucciones

6) Click the button "OK". The status bar will indicate the
progress of the formatting process. When formatting has
been finished, the following message will appear:
HDD Management
No. Type Disk Group State
1 RW Group 1 OK
Notice
Format Completed
100%
OK
Overwrite Auto
Don't show this window next time.
Abb. 7-12 Hard disk formatted
7) Click the button "OK". The available capacity and the
available recording time will be shown. To make further
settings, proceed with step 2) in chapter 7.4, or, to termi-
nate the setup, click "Cancel" and then click "OK" when
the message "Are you sure you want to cancel Startup
Wizard?" appears.

7.3 Status at first switch-on

1. Continuous recording of all channels to which a camera is
connected will start immediately, indicated by the icon
(Record) in the camera image.
2. When the hard disk is full, the oldest recordings will be
automatically overwritten (continuous recording).
3. The date and the time are not correct. The date shown
complies with the English date format: month / day / year
IMPORTANT: Always make sure to update the date and the
time (chapter 7.4 or chapter 7.6). Otherwise, it will be diffi-
cult or even impossible to find recordings made at a specific
point in time.

7.4 Startup Wizard

When the recorder is equipped with a formatted hard disk,
the "Startup Wizard" will be called up after switch-on:
Camera 03/04/2018 09:53:46
CH1
Startup Wizard
R
Don't show this window next time.
Keine Kamera Keine Kamera
Fig. 7-13 Startup Wizard
The wizard will guide you through the required settings to
be made.
Note: If the wizard fails to appear:
1) Press the right mouse button to show the toolbar:
Fig. 7-14 Toolbar; the number of icons depends on the recorder
model and its configuration
2) Click the icon "Main Menu".
Free/Total
Free Time Edit Sele
922G/931G 524Hour
Format HDD
×
Cancel Previous Next
03/04/2018 09:53:46
CH2
R
03/04/2018 09:53:46
CH3
R
Welcome to use the wizard of setup
×
Schließen Weiter
Keine Kamera Keine Kamera
3) In the main menu, click "System" in the upper bar.
4) In the last line "Show wizard", tick-select the corresponding field.
5) Click "Save" in the lower right of the menu. The message "Save Para-
meters Successful" will appear. Click "OK" to close it.
6) In the main menu, click "Shutdown" in the upper bar. A new window
will appear; click "Reboot". After the restart, the "Startup Wizard"
will appear.
If you do not want to use the wizard, click "Cancel". You will
be asked if you want to terminate the wizard. Click "OK"
to confirm. For configuration of the recorder, please refer to
chapter 7.6 on the pages 42 and 45 which provides an
overview of all menus.
1) To configure the recorder with the wizard, click "Next".
The menu for setting the hard disk will appear:
No. Type Disk Group
1 RW Group 1
Overwrite Auto
Don't show this window next time.
R
Fig. 7-15 Settings for the hard disk
2) The columns "No. and "Sele" at the top of the menu pro-
vide information with regard to the hard disk. To set the
overwrite mode, open the pop-up menu: Click the icon
Upper line
No.
Type*
Disk Group*
State
Free / Total
Free Time
Edit*
Sele
*only available for model IOR-232POE
Lower line
Overwrite
AUTO
(factory setting)
OFF
1 day
3 days
⋮
90 days
Format HDD
3) When the hard disk settings have been made, click "Next".
The menu for the network settings will appear.
i
i
HDD Management
State Free/Total Free Time Edit
OK 1923G/1931G 210Hour
Format HDD
×
Cancel Previous Next
Number of the hard disk
RW = read / write disk
Group
Hard disk okay or unformatted
Available / total hard disk capacity
Recording time still available (in hours)
For model IOR-232POE: If multiple hard disks
are inserted, open another window for config-
uration (click the icon )
Column to select the hard disk to be format-
ted (click the icon )
When the hard disk is full, the oldest record-
ings will be overwritten and deleted.
No recordings will be overwritten and deleted.
When the hard disk is full, the message
"Warning Full" will appear and it will not be
possible to make any further recordings.
Recordings can be overwritten after the
storage time selected. When the hard disk is
full earlier, it will not be possible to make any
further recordings.
Button to format the hard disk selected in the
column "Sele"
Sele

.
39