MESTO FERRUM PLUS 3560P Instrucciones De Uso página 16

GB IRL
Preparation
Observe the instructions in the chapter entitled „Safety".
The device must be in an upright position.
If filling the tank from a water line, ensure that the line or a hose does not project
into the tank.
1. Pull up the red button on the safety valve [10] until all excess pressure is released from
the tank. (Fig. 4)
2. Press the pump handle [11] down and turn it counterclockwise.
► The pump handle is locked in place. (Fig. 5)
3. Unscrew the pump [4] from the tank [2]. (Fig. 6)
+
We recommend you mix the spraying liquid in the device or premix it in an external
tank: Fill to 1/3 with water, pour in the spraying agent, and then add more water until
full.
4. Add the spraying liquid to the tank [2]. (Fig. 7)
5. Screw the pump [4] onto the tank [2]. (Fig. 9)
6. Press the pump handle [11] down and turn it clockwise.
► The pump handle is unlocked. (Fig. 10)
7. Generate the desired pressure (→ Table 2, next page) in the tank [2] (Fig. 11).
+
The maximum pressure should not exceed 6 bar (red line on the pressure gage [14],
Fig. 11). If the maximum pressure is exceeded, the safety valve will engage and
release the excess pressure.
8. Press the pump handle [11] down and turn it counterclockwise.
► The pump handle is locked in place. (Fig. 5)
AUS USA
16
NZ CDN IND