Sensor Installation - Elektrotechnik Schabus SHT 216 Instrucciones De Uso

SHT 217
APPROPRIATE USE
The water detector SHT 217 (pump control) is a device for detecting water level changes
and for monitoring sump shafts. When the sensor gets in contact with water, an audible and/
or visual alarm signal is raised and a pump connected is activated. The follow-up time of the
pump can be adjusted to a value between 0 and 100 seconds using the thumb wheel. The
device may only be used as previously described.
INSTALLATION INSTRUCTION
Warning: Do not use the device outside!

Sensor installation

The sensor reacts to water contact at the two metal contacts.
The mounting position of the sensor defines when the pump should be activated by the
device SHT 217 (figure 1).
SHT 217
Follow-up time
Sensor
100 - 0 s
sump shaft
pump
(figure 1) (figure 2)
9