Berner BPT-DGS 201144 Instrucciones De Manejo página 4

-
Always wear eye protection and protective clothing / equipment to avoid injuries
-
Pay attention, that the operation pressure never exceeds over 6,3 bar
-
Do not use pneumatic tools in explosive atmosphere
-
For sufficient tool performance make sure that the correct hose - size and fittings are used when connecting
the tool
-
Disconnect the tool from the air-supply before changing accessories or when not in use
-
Never carry the tool by the hose
-
Do not touch moving parts
-
Keep tool away from your body while working
-
Always wear ear-protection
-
Check air hose connections
-
Only disconnect the machine without pressure of the air, to avoid infractions by uncontrollable movement of the
air hose
ONLY TO USE THE MACHINE FOR THE DESCRIBED APPLICATION. BERNER DEBARS LIABILITY FOR
CONSEQUENCES FOR ALIENATED APPLICATIONS OR CONTRAVENTION AGAINST THE SAFETY RULES.
You can minimise tool „ down time „ by trying your own trouble shooting before sending a not full functioning tool to
our Customer Service Headquarters or a distributor for expert attention.
-
Check all compressor components and air delivery lines for leaks
-
Check airline whether there is dirt, water or rust in the lines
-
Check whether the impact mechanism or the air motor is overoiled
-
Check whether the compressor and the pressure is as required by the tool
-
4
1. Technical Specifications
2. Application-Function-Maintenance
3. Safety rules
4. Trouble shooting
Copyright BERNER