Disconnecting the
timer
Press the
or
timer setting. The timer is set in blocks of 15
minutes.
5 seconds after the timer has been set, the set
temperature will reappear on the display screen.
When the "on" and "off" times set on the timer
are shown on the display screen, the two dots do
not flash.
Press the START/STOP buttons for a period of
two seconds. The timer light goes out. The timer
deactivated.
The times and functions set on the timer remain
active and the programmed operation will be
repeated at the set times until deactivated or
cancelled as described above.
button in order to alter the
27