Common Problemanalysis - VOX electronics МC-7002 Manual De Usuario

 COMMON PROBLEM ANALYSIS
Phenomenon
The appliance cannot
work after power on
Bad smell from motor
The appliance
stop running during the
normal operation
The knife was stuck
Abnormal noise or shock 1. Didn't assemble the
Remark: If still unable to work out the troubles after the above analysis, please contact
our maintenance station or the dealer. It is forbidden to dis-assembly by non-professional personnel
Reason
The lid is not well
covered
It normal phenomenon
from new motor
1.The voltage is too low
2.Motor
temperature protection
The knife is stuck by
food
blade unit well
2. The appliance is not
laid flat.
3. The voltage is too
high
4. 4.Too much food
Handling method
Check the lid and
cover it well
If you have used
several times but it still
has bad smell ,
please send it back to
maintenance station.
1.Check if the voltage is
too low
2.Rest 20-30 minutes
Turn off the switch, un-
plug the device, take
out the food and cut
it to small pieces
1.Take out the food
and assemble the blade
unit well
2.Put the appliance
smoothly
3.Check if the voltage is
too high
4.Turn off the switch,
unplug the device,
take out extra food