Basic Hookup Methods - Sanyo DS13310 Manual Del Propietário

QuickTips
The TV will automati-
cally select the
correct Antenna mode
for the type of signal
you connect.
TV will switch off
automatically after 15
minutes if there is no
signal reception
(cable out or station
not broadcasting).
Exception—When the
Video mode is selected,
the TV will not automat-
ically switch off when
signal reception has
stopped for 15 minutes.
Need help?
Visit our website at
www.sanyoctv.com
or Call 1-800-877-5032
CATV FRANCHISE NOTE: Cable
companies, like public utilities,
are franchised by local govern-
ment authorities. To receive cable
programs, even with equipment
which is capable of receiving
cable channels, the consumer
must subscribe to the cable
company's service.
4

BASIC HOOKUP METHODS

Use one of these methods to connect a signal to your TV. Select 1a—if you have cable
service and a VCR, 1b—if you have a cable box and a VCR, 1c—if you have an outdoor or
indoor antenna and a VCR, or 1d—if you have a satellite dish and a VCR. Connect your
cable or antenna directly to the TV if you don't have any optional accessories.
a
Cable with VCR and TV
b
Cable with Cable Box, VCR, and TV
CABLE BOX
IN
c Outdoor or Indoor Antenna with VCR and TV
+
+
d Satellite Dish with Receiver, VCR, and TV
CH3
CH4
75 OHM Terminal
Use the 75 ohm terminal to
connect a VCR, cable,
cable box, outdoor/indoor
antenna or satellite receiver
directly to the TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT
OUT TO TV.
VCR
IN
FROM ANT.
OUT
OUT TO TV.
CATV IN
VIDEO R- AUDIO -L
OUT TO TV S-VIDEO
VIDEO R- AUDIO -L
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
TV BACK
UHF/VHF/CATV
75Ω
VCR
RECEIVER
IN
FROM ANT.
OUT
IN FROM
SAT.
OUT TO TV.
+
TV BACK