Batteries - Loc8tor Lite Manual Del Usuario

Loc8tor Handheld: If the Loc8tor does not power up or
lights are faint replace the battery using 1 x CR2032 or
equivalent placing in the battery compartment + side up.
Battery compartment can be found on the back at the
bottom. Slide down to open.
To change the batteries in a Tag: Put your thumbnail or
a flat tool at the end of the Tag, by the lanyard hole, into
the split line (line going around the middle of the Tag).
Keeping your thumbnail / flat tool in the split line move it
around to the middle of the long side. The Tag will pop
open.
• Replace with SR54 (silver oxide) 1.5v button cells or
equivalent to provide best battery life, keeping the plus
side face up nearest the lanyard
hole.
• Replace the lid by putting one side
in first then pushing shut.
• If batteries are correctly
inserted the Tag will beep
when case is closed.
To test batteries open
then shut lid by following
the above steps.
If the Tag does not beep and flash
replace batteries.
10

BATTERIES