Publicidad
Idiomas disponibles
Idiomas disponibles
6
TO ENJOY CLEAN & FRESH AIR
PATROL
PATROL/
PATROL - To monitor air quality
• Detects air quality; e-ion operation activates when air
quality is at dirty level.
• Can be activated even when the unit is turned off.
• Patrol starts automatically with the unit switched on with
OFF/ON
.
- To freshen and purify the air
• Generates negative ions to produce fresh air effect and
attract dust which will then be captured at the positively
charged e-ion fi lters.
• Can be activated even when the unit is turned off. In this
condition, fan speed and air swing can not be adjusted.
7
TO IMPROVE HUMIDITY AND MOISTURE LEVEL
Single Split System:
• This operation reduces air dryness and provides you with
a comfortable living environment during COOL mode only.
• When vertical airfl ow direction is set to AUTO, it stops at
lower position to avoid cold air contact. However, you can
adjust the louver direction manually.
Multi Split System:
• Function not applicable.
TO SWITCH BETWEEN
8
POWERFUL & QUIET
POWERFUL
POWERFUL/
QUIET
TO REACH TEMPERATURE QUICKLY
POWERFUL
• Single Split System: This operation stops
automatically after 20 minutes.
• Multi Split System: Press the button again or
turn OFF the unit to stop this operation.
TO ENJOY QUIET OPERATION
QUIET
• This operation reduces airfl ow noises.
• When this operation is activated, the
indicator brightness will be dimmed.
PATROL/
POWERFUL/
AUTO
QUIET
COMFORT
,
,
• Can be activated in all modes and can be cancelled by
pressing the respective button again.
NORMAL
POWERFUL/QUIET
QUIET
NORMAL
NOTES
NOTES
,
TO MONITOR HUMAN PRESENCE &
9
10
ACTIVITY FOR ENERGY SAVING & COMFORT
To optimize energy
saving
AUTO
To maximize comfort
COMFORT
• When either operation is activated, the unit will start to
initialize for approximately 1 minute. Human activity indicator
is blinking in sequence.
• After initialization, the human activity sensor will start to
detect the level of heat source & movement, the unit adjusts
the temperature and airfl ow to keep you comfort consistently.
Low
Heat Source & Movement
Cool/Dry Mode
Set Temperature
+1 tap*
Set Fan Speed
Heat Mode
+0.3°C
Set Temperature
Set Fan Speed
* For first 15 minutes or until set temperature is reached.
• Human activity sensor will also scan for area of heat source
and movement in a room.
Human activity indicator Heat source & movement
• The unit will determine the heat source & movement hotspot,
and automatically adjust horizontal airfl ow direction louver
either fi x at predetermined position or swing left/right.
Detection area (top view)
7m
120º
• When manual AIR SWING
and AUTO COMFORT operation will be cancel.
• Sensor may not detect moving objects further than 7m away
or beyond detection angle.
• Sensor sensitivity is infl uenced by indoor unit location,
movement speed, temperature range, etc.
• The sensor may mistakenly detects pets, sunlight, certain
lighting, fl uttering curtains and light refl ection as human being.
POWERFUL/
AUTO
QUIET
COMFORT
,
,
• Cannot be selected at the same time.
• Cannot be activated during "MILD DRY COOLING"
operation is activated.
AUTO COMFORT
High
Normal
None
+1°C
-1°C
≤ Medium
Fan
+1 tap
-2°C
At left area of the room
At right area of the room
At centre area or multiple areas
of the room.
is selected, the ECONAVI
+2°C
-2°C
7
Publicidad
