(Zeroconf) is used to choose an IP address. When the IP address is
set using Zeroconf, the IP address is in the 169.254.0.0/16 subnet.
The IP address settings can be changed using one of the following
methods:
•
(Recommended) Avigilon Camera Installation Tool
software application.
•
Camera's web browser interface:
http://<camera IP address>/
•
ARP/Ping method. For more information, see Setting the
IP Address through the ARP/Ping Method.
•
Network Video Management software application (for
example, Avigilon Control Center).
NOTE: The default camera username is admin and the default
password is admin.
Accessing the Live Video Stream
Live video stream can be viewed using one of the following methods:
•
(Recommended) Avigilon Camera Installation Tool
software application.
•
Camera's web browser interface:
http://<camera IP address>/.
•
Network Video Management software application (for
example, Avigilon Control Center).
NOTE: The default camera username is admin and the default
password is admin.
Aiming the Dome Camera
1.
Loosen the pan and tilt lock screws on the camera.
2.
Turn the lens to the desired direction by panning and tilting
the lens.
3.
Once satisfied, tighten the pan and tilt lock screws to
secure the dome camera's position.
4.
Rotate the azimuth control ring to set the image to the
correct angle.
8