Manual Co Gas Supply Line A/B Changeover - Phcbi MCO-170AIC Instrucciones De Operación

GAS AUTO-CHANGER (OPTIONAL)
Manual CO
It is possible to change the CO
1. Press the gas supply line select key "B" for a
few seconds.
2. CO gas supply line is changed from A to B.
2
Note: Table 3 sets out the process if the gas supply has been changed automatically and supply line is
then manually changed to an empty cylinder before the Buzzer key is pressed.
Table 3. Manual change from cylinder B to empty cylinder A
Situation
Supply has been
automatically
1
changed to supply
line B
Buzzer key not
pressed but gas
2
supply line select key
is pressed
62
gas supply line A/B changeover
2
gas supply line A/B manually at any time. For example:
2
CO gas
2
Supply line Cylinder A Cylinder B
B Empty Remaining
A Empty Remaining
CO gas supply line indicator
2
A
Reverse
video Light on
and blink
Blink Light off
Message
display field
B
Err01:
CO Gas Empty
2
(and buzzer)
Err01:
CO Gas Empty
2
(and buzzer)