Pleasant Hearth 24-44-34M Manual Del Usario página 5

ASSEMBLY INSTRUCTIONS
4. Lay the top trim panel (P) curved side down.
Insert short connector (BB) into predrilled holes
and secure with bolt (AA).
5. Insert 2 dowels (KK) into predrilled holes in
each end of the top trim panel (P). Slip the left
end of the top trim panel (P) into the predrilled
holes in the edge of the left panel assembly
until snug. Repeat using the right panel
assembly.
6. Set base (B) on a clean, flat surface. Insert
8 dowels (DD) into predrilled holes in the base
(B) as shown. Slip previously assembled inner
panel over dowels (DD) until snug and secure
with bolts (AA). Slip each of the side panels (E)
over dowels (DD) in left and right edges of the
base (B), flat side facing out, and secure with
bolts (AA).
4
AA
BB
5
F
P
6
E
AA
5
P
KK
G
E
B
DD