Pleasant Hearth 24-44-34M Manual Del Usario página 8

ASSEMBLY INSTRUCTIONS
13. Insert 4 shelf pins (HH) into predrilled
holes in side walls of each cabinet at preferred
height. Attach the left door (H) to the left cabi-
net using hinge screws (JJ) as shown. Repeat
using the right door (J). Level the cabinet
doors using a Phillips screwdriver as shown
in inset diagrams. Attach knobs (EE) to each
door using screw included with knob (EE).
14. Set adjustable shelves (Q) in desired
positions in each cabinet.
15. Set completed mantel in desired position
against wall. Place the insert directly in front
of the mantel opening. Carefully lift the insert
through the center opening in the front of the
fireplace. The bottom of the insert has two
foam rubber strips to prevent scratching of the
hearth base. Slide the insert back through the
opening until the metal trim makes contact with
the front of the mantel.
13
H
HH
JJ
14
Q
15
8
EE
Q
J