Bushnell Scout DX 100 ARC Manual Del Usuario página 11

Brush (Indicator - ): This advanced mode allows objects such as brush and tree branches to be ignored so that
™
distance only to background objects are displayed. When more than one object has been acquired, distance of the
further object will be displayed and a circle will surround the Brush™ indicator informing the user that distance of
the farthest object is being displayed.
Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle onto the object that
you want distance to. Next, press and hold the POWER button and move the laser slowly over the object until a circle
surrounds the Brush indicator. If the laser beam recognized more than one object (i.e. closeup tree branch and a deer
in the background), distance of the further object (i.e. deer) will be displayed and a circle will surround the brush
indicator informing the user that distance to the farther object is being displayed (Figure 2). There may be times when
only the laser beam only sees one object in its path. In this case, the distance will be displayed, but because more than
one object was not acquired, the circle will not surround the Brush indicator.
TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to
ensure that you are only displaying the furthest of the objects recognized by the laser. Once the device has shut off, the unit will always default back to
the last targeting mode used.
MENU SETUP – SELECTION of BOW, RIFLE, REGULAR MODES, UNIT OF MEASURE, SIGHT-IN DISTANCE AND BALLISTIC
CORRECTION
ARC (Angle Range Compensation)
There are two ARC™ (Angle Range Compensation) modes and one REGULAR mode. The two ARC™ modes are
BOW mode ( ) and RIFLE mode ( ).
To select between these modes, first turn the unit "ON" by pressing and releasing the POWER button. Next, press and
hold the MODE button for three seconds to get into the SETUP menu. You will see the existing compensation mode
indicated by either the "Bow" symbol ( ), the "Rifle" symbol ( )lit with one of the ballistic groups (A thru J)
11