Bushnell Scout DX 100 ARC Manual Del Usuario página 6

GETTING STARTED
OPERATIONAL SUMMARY
While looking through the Scout DX 1000 ARC™, depress the power button once to activate the display. Place the
aiming circle (located in the center of the field of view) upon a target at least 5 yards away, depress and hold the power
button down until the range reading is displayed near the bottom of the in-view display. Crosshairs surrounding the
aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the power
button. The crosshairs surrounding the aiming circle will disappear once the power button has been released (i.e. the
laser is no longer being transmitted).
Note: Once activated, the display will remain active and display the last distance measurement for 30 seconds. You can depress the power button again
at any time to distance to a new target. As with any laser device, it is not recommended to directly view the emissions for long periods of time with
magnified lenses. The maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button down again.
6