Ordering Parts - Shark NV350 Serie Guia Del Usuario

Maintenance - cont'd
Fig. 33
Fig. 34
Fig. 35
• Remove the dust cup and extension wand
and separate the detachable canister from the
motorized floor brush. Look in all 4 openings
for any blockages. (Fig. 33)
Motorized Floor Brush
• Detach the hose on the motorized floor brush
at the top by squeezing the tabs together and
pulling out, and at the bottom by pulling out
the connector. Inspect inside the 3 holes.
(Fig. 34)
Bare Floor Nozzle
(models NV350, NV350A & NV350E only)
• Straighten out the neck and look inside the
tube at the top of the nozzle. Check for
blockages where the hose bends and in the
intake opening. (Fig. 35)
16 TOLL FREE: 1-800-798-7398
NV350_26_NV350A_26_NV350E_26_NV350T_26_NV351_26_IM_ENG_SPA_101105.indd 16

Ordering Parts

1
2
3
4
5
7
PART
1
Pre-Motor Filter Set
2 Post-Motor Filter Set
3
HEPA Filter (NV350E)
4
Dusting Brush
& Crevice Tool
5
Turbo Brush
(NV350, NV350A, NV350E & NV350T)
6
Turbo Brush
(NV351)
7
Bare Floor Nozzle
8
24" Crevice Tool
6
8
PART NO.
XFF350
XPF350
XHF350
112FFJ
1117FC
119FFJ
118FFJ
1124-FC
10-11-05 10:54 AM