Changing Your Password; Using The Vcr; Playing A Videotape; Adjusting The Tracking - Insignia NS-R27TR Guia Del Usuario

To block TV program ratings:
1 Make sure that you are in TV/VCR mode by
pressing the INPUT button.
2 Press the SETUP button.
3 Press the or
SET UP, then press the ENTER button.
4 Enter your password with the number
buttons. The default password is 0000. For
first time setup or if the power fails, use the
default password.
5 Press the or
RATING, then press the ENTER button.
6 Press the or
you want to block or unblock, then press the
ENTER button to change the setting to
BLOCK or VIEW. When you block a rating,
that rating and all higher ratings are blocked.
7 If the rating you selected has sub-ratings,
press the or
sub-rating, then press the ENTER button to
block the rating.
8 Press the SETUP button to close the menu.
To block movie ratings:
1 Make sure that you are in TV/VCR mode by
pressing the INPUT button.
2 Press the SETUP button.
3 Press the or
SET UP, then press the ENTER button.
4 Enter your password with the number
buttons. The default password is 0000. For
first time setup or if the power fails, use the
default password.
5 Press the or
RATING, then press the ENTER button.
6 Press the or
you want to block or unblock, then press the
ENTER button to change the setting to
BLOCK or VIEW. When you block a rating,
that rating and all higher ratings are blocked.
7 Press the SETUP button to close the menu.
Note
To change a rating, your TV combo must be tuned
to an unblocked program. If the message
"PROTECTED PROGRAM" appears, change the
channel to an unblocked channel.

Changing your password

To change your password:
1 Make sure that you are in TV/VCR mode by
pressing the INPUT button.
2 Press the SETUP button.
3 Press the or
SET UP, then press the ENTER button.
4 Enter your password with the number
buttons. The default password is 0000. For
first time setup or if the power fails, use the
default password.
5 Press the or
PASSWORD, then press the ENTER button.
16
button to select V_CHIP
button to select TV
button to select the rating
button to select to select a
button to select V_CHIP
button to select MPAA
button to select the rating
button to select V_CHIP
button to select CHANGE
www.insignia-products.com
Insignia NS-R27TR 27" Round Tube TV/DVD/VCR Combo
6 In the NEW PASSWORD box, enter your
new password with the number buttons, then
enter your new code again in the CONFIRM
PASSWORD box.
7 Press the SETUP button to close the menu.

Using the VCR

Your TV combo can play any videotape that has
the VHS mark. Use high quality tapes. Avoid
using poor quality or damaged tapes.
You can play videotapes recorded in SP
(standard play mode), LP (long play mode), and
SLP (super long play mode).

Playing a videotape

To play a videotape:
1 Insert a pre-recorded videotape into the
videotape compartment. Your TV combo
turns on automatically.
2 Make sure that your TV combo is in TV/VCR
mode by pressing the INPUT button. The
TV/VCR indicator lights on the front of your
TV combo.
3 Press the PLAY
Note
If your TV combo is in DVD mode, you can start
playback by pressing the PLAY button on the
VCR side (right) of the front of your TV combo.
4 To stop playback, press the STOP
5 To rewind the videotape, press the
SKIP/REW
videotape, press the FWD/SKIP
To stop rewinding or fast-forwarding, press
the STOP
6 To eject the tape, press the
STOP/EJECT
TV combo.

Adjusting the tracking

Your TV combo automatically adjusts the
tracking when you start playback. If you see
noise lines (black and white streaks) on the
screen, you can manually adjust the tracking.
To manually adjust the tracking:
1 While the videotape is playing, press the
CH or CH
disappear. This feature works during normal
playback and in pause, still, and stop modes.
2 To stop manual tracking, stop playback, then
start playback again.

Freezing the picture

To freeze the picture:
1 During playback, press the PAUSE
button.
You can advance the picture one frame at a
time by pressing the PAUSE
button.
button to start playback.
button. To fast-forward the
button.
button.
button on the front of your
button until the streaks
SLOW
•
SLOW
•
button.