Using The Vacuum Cleaner; Wet Vacuuming - ECG VM 3140 HOBBY Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 58
3.
Place the motor unit with the installed filter on the vacuum cleaner container. Snap the motor unit lock on
the to the locks on the body of the vacuum cleaner.
4.
Insert the end of the hose into the opening in the body of the vacuum cleaner and lock it by turning
clockwise (
3
5.
Plug the electric cable in the electric outlet (
switch 6.
1
GB

USING THE VACUUM CLEANER

Selection of suitable accessories according to the type of the vacuumed surface
Vacuum cleaner is supplied with accessories suitable for different types of floors and surfaces:
Combined floor nozzle with a switch between hard floors and carpets, articulated mechanism makes
A
cleaning corners and difficult to reach places easy to reach.
Combined nozzle and dust brush for sofas, drapes and difficult to reach places in corners or between
B
the furniture.
The Turbo brush is suitable for vacuuming durable materials.
C
A
Vacuuming
Make sure that the vacuum cleaner is assembled according to the instructions.
Connect the hose to the vacuum cleaner and attach the required accessories to the telescopic tube.
Plug the power plug into an electric outlet, turn the vacuum cleaner on and vacuum as needed. After using
the vacuum cleaner, turn off the power switch and pull the power cord out of the outlet.

Wet vacuuming

When vacuuming a small amount of liquid, the HEPA filter can stay in place. If you vacuum a large volume
of liquid, we recommend removing the HEPA filter and installing a foam filter instead.
When the liquid in the vacuum cleaner container reaches the maximum allowable level, the float of the
locking mechanism rises and automatically interrupts the air flow through the motor. In this case, switch
off the vacuum cleaner, disconnect the power supply and empty the vacuum cleaner container.
After wet vacuuming, the filter should be dried to reduce the risk of mold formation and destruction of
the filter.
30
).
2
). The vacuum cleaner is now ready to turn on using the
4
3
B
C
4

Publicidad

Tabla de contenido
loading

Tabla de contenido