CRESTO WORKER PRO Manual Del Usuario página 4

EN
fall unconscious in a suspended position it is vital to get him/her down to the
ground as fast as possible. Rescue equipment and knowledge is consequently
very important.
Warning! That no-one works alone where there is a risk of falling. Ensure that
you are feeling alert and fit for work, have drunk sufficiently and that you are
properly clothed for the conditions.
NOTE! The harness is made One Size and fit most body's.
NOTE! Make it a practice to regularly check the buckles and their correct
adjustment during use.
NOTE! The harness's material or its function can be affected if it is exposed
to: extremely high temperature (>100c), chemicals, electrical current, grinding,
cutting, abrasion against sharp edges and exposure to weather.
NOTE! All Cresto fall protection equipment has labels for marking. The label
shows the manufacturer's name, product name, model type, unique serial
number, date of manufacture, EN norm and Notified body Institute number.
NOTE! The product's maximum lifecycle is 10 years from the date of first use
(max 2 years' addition from the first production date). Incorrect handling and
wear-and tear can significantly shorten the lifecycle. The product shall be
discarded if it has: corrosion damage, several thread breakages, cut-off
webbing edges by more than 2 mm, discoloured webbing, heavy wear-and-tear
colour worn away", corroded metal parts or if it lacks functionality and marking
(ask Cresto if unsure).
Warning! If the product is exported, the retailer shall provide a translation of
this user's instruction, maintenance and inspection instruction to the language
where the product is to be used.
M A I N T E N A N C E A N D T R A N S P O R T
NOTE! The equipment shall be stored in a dry, dark and well-ventilated
location, protected against steam, sharp edges, vibration and UV-light. The
equipment shall be kept clean for best functionality and durability. Metal parts
can be blown clean with compressed air. Avoid lubricating oil! Lightly soiled
equipment can be washed with a brush in lukewarm water. A mild soap solution
can be used. Heavily soiled equipment can be machine-washed in a wash-bag
with phosphate-free detergent in a 40° program. Wet equipment is hung up to
dry. Equipment shall be allowed to air-dry without being subjected to open fire
or any other heat source.
I N S P E C T I O N
Warning! For the user's safety the product shall be inspected at least every
twelve months in order to ensure its functionality and durability (refer to
EN 365). The inspection can be registered in Inspector online at
www.cresto.com.
NOTE! In cases of frequent usage of the equipment or in aggressive
environment, inspections shall be carried out at more frequent intervals (as
decided by a trained competent person).
Warning! The inspection shall be carried out by a competent person (a person
who has been trained and is competent in fall protection equipment inspection)
who holds a certificate for inspection and in accordance with the
manufacturer's inspection procedure as well as EN 365.
NOTE! The product's label marking must be legible! (The harness is also fitted
with a RFID/NFC chip for traceability if the label is not legible).
L O G
Each component in a fall protection system (EN363:2008) shall be entered in
a log or equipment register. This is to be completed by a "competent person"
at least every twelve months. (Refer to Inspector at www.cresto.com for more
information). Documentation is available for download at
www.cresto.com/documentation to support your equipment menagement
and record keeping.
R E P A I R S
Repairs to the products may only be carried out by the manufacturer.
S U S T A I N A B I L I T Y & R E C Y C L I N G
We design and manufacture premium products, with premium materials, to be
used actively and to last long. When the product is decided to be taken out of
use, or its maximum lifetime has expired, it should be recycled according to
your local legislations. Our products are made of polyester, polyamide or PVC
and metal components. If necessary dismantle the metal components before
recycling. You can also send the complete product to Cresto and we will take
care of the recycling in order to reduce our impact on the environment.
C O M P L I A N C E
EU type evaluation certificate: Notified Body: 0402
EU type inspection and production control: Notified Body: 0402
Notified Body: 0402
RISE
Box 857
SE-501 15 Borås
Sweden
www.ri.se