Sony PSP-1010 Manual De Instrucciones página 286

Sound
There is no sound.
, Check that the volume is not set to zero. Try raising the volume
( pages 167, 171).
, Check that the mute setting is not on. Press the sound button on the system
front to clear the mute setting (
, If headphones are inserted, the system will not produce any sound through
the speakers.
, See also "There is no sound, or the sound quality from the headphones is
poor." (
The volume does not turn up.
, Check that the AVLS feature is turned off. When turned on, the AVLS
feature limits the maximum volume of the headphones (
Sound quality is poor.
, If the system is used in an area where there are vibrations, or if it is near
strong magnetic objects such as a television, the sound may be distorted and
there may be increased background noise. Try moving the system to a
different location.
UMD
®
The system does not recognize the UMD
, Check that the UMD
etc.). Try taking out the UMD
, Check that the UMD
a soft cloth (
The UMD doesn't play properly.
®
, If moisture condensation occurs, remove the UMD
do not use the system for several hours until the condensation evaporates
( page 164).
Troubleshooting
286
page 290).
is properly inserted (label is facing the system rear,
®
recorded surface is clean. If not, wipe it gently with
®
page 164).
page 183).
.
®
and reinserting it.
®
page 253).
from the system and
®