Assembly Instructions - Kobalt SGY-AIR135TZ Manual Del Usuario

ASSEMBLY INSTRUCTIONS

1. Remove the air inlet protective cap from the
air inlet (G) (See Figure 1).
2. Add threaded sealant tape (not included) to
the threading of a male plug (not included),
then insert the male plug by hand into the air
inlet (G). Tighten the male plug by turning it
clockwise with a wrench (not included).
DO NOT OVERTIGHTEN.
3. Place 2-3 drops of air tool oil (not provided)
into the male plug before each use.
1
2
3
kobalttools.com
10