Manuales relacionados para Serta 48058
Resumen de contenidos para Serta 48058
- Página 1 Serta Ashland Home Chair Butaca Ashland de Serta Assembly Instructions Instrucciones de ensamblaje MODEL / MODELO 48058 Soporte m á ximo de la silla: 113 kg 250 lbs 250 lbs...
-
Página 2: Instrucciones De Ensamblaje
Chair Assembly Instructions Carefully unpack all parts and identify them against the parts list before attempting to assemble. To avoid scratching the components, assemble the chair on a protected surface. Note: The casters sold with this chair are intended for use on carpet and not recommended for use on tile or hard wood floors. - Página 3 Parts/Partes Casters Star Base Gas Lift Ruedas Base en forma de estrella Elevador neumático Quantity/cantidad: 1 Quantity/cantidad: 5 Quantity/cantidad: 1 Seat Plate Seat Cushion Back Cushion Mecanismo del asiento Cojín del asiento Cojín del respaldo Quantity/cantidad: 1 Quantity/cantidad: 1 Quantity/cantidad: 1 1”...
- Página 4 Step 1 Place the Star Base (B) upside down and insert 5 Casters (A) into the holes on the Star Base (B). Paso 1 Ponga la base en forma de estrella (B) con las patas hacia arriba e inserte las 5 ruedas (A) en los hoyos situados en la base (B).
- Página 5 Step 3 Attach Seat Plate (D) to the bottom of the Seat Cushion (E) (with the front of the seat plate facing the front of seat cushion). Attach by using 1” Screws (G) for the holes of the Seat Plate (D) with the Allen Key (I). *Note: Align the Seat Plate so the FRONT on the seat plate matches the FRONT label on the bottom of the seat cushion.
- Página 6 Step 4 Align the back cushion to the bottom of the seat cushion by using 1-3/4” Screws with Flat Washers (H). Tighten the screws. Paso 4 Alinee el cojín del respaldo a la parte inferior del cojín del asiento el uso de tornillos de 44mm con arandelas planas (H). Ajuste los tornillos.
- Página 7 Step 5 Position the assembled chair upright with the seat plate facing down. Insert the Gas Lift (C) into the center hole of the Seat Plate (D). Paso 5 Coloque la silla ensamblada verticalmente, con la plancha del asiento hacia abajo. Inserte el elevador neumático (C) en el hoyo central de la mecanismo del asiento (D).
-
Página 8: Function Instruction
Operating Instructions Instrucciones de Uso Function Instruction - 1 To Adjust Seat Height: While seated, lean forward and reach under the right side of the chair to find the handle. Lift the handle and raise your body up slightly to allow the chair to rise to the desired height. Once desired height is reached, release handle to lock chair at desired height. -
Página 9: Para Ajustar La Tensión Del Mecanismo Deinclinación
Function Instruction - 2 To Operate Tilt Lockout: While seated, reach under the right side of the chair to find the height adjustment handle. Pull the handle all the way out (away from the seat plate) to allow the chair to tilt backwards. To lock the chair in the upright or vertical position, sit upright and push the handle in towards the seat plate. - Página 10 Limited Warranty True Innovations seating products are warranted against defects in material and workmanship while owned by the “Original Purchaser”. The term “Original Purchaser” is defined as that party or entity which purchases True Innovations furniture from an authorized True Innovations retailer as shown by the original sales receipt.
-
Página 11: Garantía Limitada
Garantía Limitada Los productos de True Innovations seating están garantizados contra defectos de material y mano de obra mientras está en posesión de su “Comprador Original”. El término “Comprador Original” se define como el individuo o entidad que compra el mueble de True Innovations de un distribuidor autorizado así...