Installation And Adjustment; Manner Of Delivery; Adjusting The Seat Height - Vermeiren V100 Manual De Instrucciones

3

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren V100 has been designed to be adjust with a minimum of replacements parts.
There is no need for extra stock of spare parts.
3.1

Manner of delivery

The Vermeiren V100 shall be delivered with:
1 frame with arm supports, rear and front wheels (seat height of 50 cm - 19.69 in.)
1 pair footrests
Tools
Manual
Accessories
3.2

Adjusting the seat height

The Vermeiren V100 is adjustable in 3 seat heights by changing the wheels position. At each
height there is a different setting of the front and rear wheels.
L
WARNING:
The top hole of the axle plate is not intended for mounting the rear
axle - This hole is for mounting the drum brake.
Seat height
47cm (18.50 in.)
50 cm (19.69 in.)
(Standard)
53 cm (20.87 in.)
Rear wheel
Hole 1 Both bushings above the castor
stem housing
Hole 2 One bushings above, and one
under the castor stem housing
Hole 3 Both bushings under the castor
stem housing
Table 2: Seat heights
Change the seat height according the following steps:
1.
Remove the rear wheels (see § 2.12).
2. Screw the axle bushings of the rear wheels
from the axle plate.
3. Assemble the axle bushings in the right hole of
the axle plate, see Table 2.
4. Check if the axle bushings are fastened well.
Page 15
V100
May 2010
Front wheel
E