Mitsubishi Electric Mr.Slim SLZ-KA25 Manual De Instrucciones página 12

2. Operation
2.13. Function selection of remote controller [For wired remote controller]
The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when
needed.
Item 1
1. Change Language Language setting to display
("CHANGE LANGUAGE")
2. Function limit (1) Operation function limit setting (operation lock)
("LOCKING FUNCTION")
("FUNCTION SELEC-
TION") (2) Use of automatic mode setting ("SELECT AUTO
MODE")
(3) Temperature range limit setting ("LIMIT TEMP
FUNCTION")
3. Mode selection (1) Remote controller main/sub setting ("CON-
TROLLER MAIN/SUB")
("MODE SELECTION")
(2) Use of clock setting ("CLOCK")
(3) Timer function setting ("WEEKLY TIMER")
(4) Contact number setting for error situation
("CALL.")
(1) Temperature display °C/°F setting ("TEMP
4. Display change
MODE °C/°F")
("DISP MODE SETTING")
(2) Suction air temperature display setting ("ROOM
TEMP DISP SELECT")
(3) Automatic cooling/heating display setting
("AUTO MODE DISP C/H")
2.13.1. Function selection flowchart
[1] Stop the air conditioner to start remote controller function selection mode. → [2] Select from item 1. → [3] Select from item 2. → [4] Make the setting. (Details are specified
in item 3) → [5] Setting completed. → [6] Change the display to the normal one. (End)
Normal display (Display when
the air condition is not running)
(Hold down the E button and press the D button for two
seconds.)
* The display cannot be changed during the unit function
selection, the test run and the self diagnosis.
Item 1
Press the G button.
Change Language
("CHANGE LANGUAGE")
Press the
→ Operation function limit setting ("LOCKING FUNCTION")
E button.
Function limit
Use of automatic mode setting ("SELECT AUTO MODE")
("FUNCTION
Press the
SELECTION")
G button.
Temperature range limit setting ("LIMIT TEMP FUNCTION")
Press the Press the
E button. E button. → Remote controller main/sub setting ("CONTROLLER MAIN/SUB")
Press the
Use of clock setting ("CLOCK")
G button.
Mode selection
("MODE
Timer function setting ("WEEKLY TIMER")
SELECTION")
Contact number setting for error situation ("CALL.")
Press the
E button.
→ Temperature display °C/°F setting ("TEMP MODE °C/°F")
Press the
Display change G button.
Suction air temperature display setting ("ROOM TEMP DISP SELECT")
("DISP MODE
SETTING")
Automatic cooling/heating display setting ("AUTO MODE DISP C/H")
12
Item 2
(Hold down the E button and press
the D button for two seconds.)
* The remote controller records the
setting that is made in this way.
Remote Controller Function Se-
lection Mode
Item 2
Press the G button.
Press the G button.
Press the G button.
Item 3 (Setting content)
• Display in multiple languages is possible.
• Setting the range of operation limit (operation lock)
• Setting the use or non-use of "automatic" operation mode
• Setting the temperature adjustable range (maximum, minimum)
• Selecting main or sub remote controller
* When two remote controllers are connected to one group, one
controller must be set to sub.
• Setting the use or non-use of clock function
• Setting the timer type
• Contact number display in case of error
• Setting the telephone number
• Setting the temperature unit (°C or °F) to display
• Setting the use or non-use of the display of indoor (suction) air
temperature
• Setting the use or non-use of the display of "Cooling" or "Heat-
ing" display during operation with automatic mode
NOTE
Timer operation stops when the display for
remote controller function selection is
changed to the normal one.
See [4]–1
Item 3
(Setting content)
See [4]–2. (1)
Press the
D button.
See [4]–2. (2)
See [4]–2. (3)
Press the
D button.
See [4]–3. (1)
F
See [4]–3. (2)
See [4]–3. (3)
E
See [4]–3. (4)
G
Press the
D button.
See [4]–4. (1)
See [4]–4. (2)
See [4]–4. (3)
Dot display
The language that is selected in
CHANGE LANGUAGE mode ap-
pears on this display. English is
set in this manual.
TEMP. ON/OFF
I
A
MENU ON/OFF
FILTER
BACK MONITOR/SET DAY CHECK TEST
B
PAR-21MAA CLOCK OPERATION CLEAR
H
C D