jbc RMSE-B Serie Manual De Usuario página 14

Operation
The JBC Exclusive Heating System
Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user
can work at a lower temperature and improve the quality of soldering. The tip temperature is further
reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.
1. Work 2. Sleep
When the tool is lifted from the When the tool is in the stand,
stand the tip will heat up to the the temperature falls to
selected temperature. 180ºC / 360ºF (preset sleep
temperature).
17:14
T245
350
ºC
Sleep
Tool in the stand
Actual Temp. 180ºC
Selected 350ºC
Delay to hibernation: 29:30
Power Port
45% 2
Tools Menu: Tools Menu:
· Set temperature limits · Set Sleep temperature
· Select temperature levels · Set Sleep delay
(from 0 to 9 min or no Sleep)
26
3. Hibernation
Long time in
the stand
After longer periods of
inactivity (pre-set to 30 min.),
the power is cut off and the
tool cools down to room
temperature.
17:14
17:14
T245 T245
Hibernation
Actual Temp. 25ºC
Port
2
Tools Menu:
· Set Hibernation delay
(from 0 to 60 min or no
hibernation)
Work Screen
The DDE offers an intuitive user interface which provides quick access to station parameters.
Status bar
Power
indicator
Displayed if
temperature
levels are
activated
Menu Options
Press INFO for each parameter description.
Port
2
Station Tools
Peripherals Graphics
17:14
T245
350
ºC
Temp. Levels
250 350 380
Power Port
45% 2
System notifications (Status Bar)
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a robot.
Counters
Station software update.
Press INFO to start the process.
Warning.
Press INFO for failure description.
Error. Press INFO for failure description,
Reset the type of error and how to proceed.
w w w.jbctools.com
Tool
in use
Station
Information
Change
port
27