Technical Specifications; Dc Voltages; Ac Voltages (Ac And Ac+Dc) - Metrix ASYC II Serie Manual De Instrucciones

Chapter II
5.

TECHNICAL SPECIFICATIONS

Only those values assigned tolerances or limits are guaranteed values. Values without
tolerances are given for information only (French standard NF C 42-670).
{Accuracy : ''n% R + nD'' means ''n% of the reading + n digits'' as per IEC 485}
5.1.

DC voltages

Selector
switch position
mV
V
DC
* Refer to § 3.4.
Number of points :
Range selection :
Common mode rejection : at 50 and 60 Hz, better than 120 dB
Serial mode rejection :
Additional error in Pk +/- mode for a pulse of ≥ 1 ms : 1% R ± 50 D
For measurements performed on alternative signals, the selected range must tally with the
max. value of the signal peak.
5.2.

AC voltages (AC and AC+DC)

Selector Ranges
switch
position
mV + 500 mV*
SEL/ON
5 V
V or 50 V
AC
V + 500 V
DC
SEL/ON 750 V
* AC+DC only
Number of points :
Range selection :
Common mode rejection :
Additional error according to crest factor :
0.2 % for a crest factor of 2 to 3
0.5 % for a crest factor of 3 to 6
(Specification given full scale for a squarewave signal pulse 200 µs wide)
Portable digital multimeter
Ranges Accuracy
500 mV 0.025%R** + 2D
5 V 0.025%R** + 2D
50 V 0.025%R** + 2D
500 V 0.025%R** + 2D
1000 V 0.025%R** + 2D
** at 23°C ± 2°C
50 000 (or 5 000 - refer to § 3.4.)
automatic or manual for the 5 V, 50 V, 500 V, 1000 V ranges
at 50 and 60 Hz, better than 60 dB
DC* 40 Hz 1 kHz to
to 1 kHz
4 kHz
from 5 % to 100 % of the range
0.3% R + 30 D 1 % R
+ 30 D
///////////
*** 1 mn max
50 000 (or 5 000 - refer to § 3.4.)
automatic or manual for the 5 V, 50 V, 500 V, 750 V ranges
at 50 and 60 Hz, better than 80 dB
Input
impedance
10 MΩ/1GΩ*
11 MΩ
10 MΩ
10 MΩ
10 MΩ
Accuracy
4 kHz to 10 kHz to
10 kHz 30 kHz
from 10 % to 100 % of the range
7 % R
+ 30 D /////////////
2 % R + 30 D
///////////// /////////////
Protection
± 1100 V ***
PK
± 1100 V
PK
± 1100 V
PK
± 1100 V
PK
± 1100 V
PK
*** 1mn max
Input
impedance
30 kHz to
50 kHz
10
MΩ/1GΩ **
// 100 pF
11 MΩ
// 100 pF
3 % R 10 MΩ
// 100 pF
+ 30 D
10 MΩ
// 100 pF
///////////// 10 MΩ
// 100 pF
** Refer to § 3.4.
Resolution
10 µV
100 µV
1 mV
10 mV
100 mV
Protection Reso-
lution
±1100V 10 µV
P
***
K
± 1100 100
V µV
PK
± 1100 1 mV
V
PK
± 1100 10 mV
V
PK
± 1100 100
V mV
PK
31