Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
FITTING THE LOG JAWS
1. Position the front jaw (1) onto the fixed jaw with the mounting holes aligned.
2. Insert the coach bolts (3) through the holes and tighten the mounting knobs (4) onto the bolts to
secure the front jaw into position.
3. Locate the rear jaw (2) onto the moving jaw, with the mounting holes aligned.
4. Secure the rear jaw (2) into position using the remaining coach bolts (3) and mounting knobs (4).
IN USE
These jaws can accommodate logs or poles up to approximately 300mm (12") diameter. When
clamping large diameter material avoid applying too much force on the food pedal as excessive
pressure on the top of the log jaws can damage the clamping mechanism.
Take great care when chainsawing. Ensure that the work is securely clamped and that
measures have been taken to handle the offcut. Follow all of the chainsaw manufacturers
safely and operating instructions.
Assembly - In use
3
Publicidad
