Haldex EL13060 Manual Del Usario página 2

FROM BENDIX
4.84
Ask These Questions:
1. Is the compressor a top head discharge?
2. If compressor is a side head discharge, is there clear-
ance for a top head discharge installation?
3. Are all water ports 1/2" NPT?
4. EL1300 and EL1600 are all 1/2"?
5. Will additional lines and fittings be required to relocate
governor?
6. Will additional water lines and fittings be required for
installation?
Optional Installation Choices:
1. Remote mount governor.
2. Remote mount air cleaner.
3. Head can be rotated 180°.
4. If application is bottom oiled, discard pipe plug (Item 15)
and plug end cap with both pipe plugs (Item 14).
5. If application is oiled through end cap, plug oil entry in
bottom crankcase with pipe plug (Item 15) and one option
in the end cap with pipe plug (Item 14).
EL1600
11.60
EL1300
11.41
2.21
Changeover Materials that Must be
Supplied:
1. If top discharge, supply SN3711J Manifold Kit.
2. If top head clearance is a problem, supply SN371 1K or
SN3711L Low Profile Discharge Manifold Kit, or
SN3711AH Side Discharge Manifold Kit.
3. Possibly need 1/2" to 3/8" water port reducers.
4. If replacement is changed to naturally aspirated, supply
plug to plug the turbocharger port on the engine.
5. If replacing a no-base unit, supply SN3722 Adapter
Plate Kit.
Changeover Material that Should be
Considered:
1. For ease of changeover and extended life of the
compressor, use the KN17500 Series Flexible Teflon
Discharge Line Kit.
2. Let the compressor breathe. Use a KN19040 Heavy-Duty
Filter.
3. Universal Waterline Kit SN3502 to hookup coolant lines.
Changeover Material that Might be
Required:
1. Remote Mount Governor Kit SN4011B.
2. Drive gear and drive coupler.
TO HALDEX
11.20
Compressor Illustration
EL13060
EL16060
7
11
10
6
9
5
8
4
3
A
2
14
1
15
These units will changeover: a BW, Tu-Flo 501, no-base on
a CAT Mount 3208 Ford application by using the SN3722
Adapter Plate Kit. Remove and discard the existing alu-
minum plate. Replace with the steel Haldex SN3722 plate.
Item Description
1 Crankshaft Nut ............................................a
2 Cotter Pin ....................................................b
3 Elbow 1/2" ...................................................b
4 Hose Fitting 1/2" Pipe to 1/2" Hose ............b
5 Water Hose 1/2" ID .....................................b
6 Hose Clamp ................................................b
7 Hose-to-Hose Coupling 1/2" .......................b
8 Manifold Gasket....................................a & c
9 Manifold Lockwashers.................................c
10 Manifold Bolts..............................................c
11 Discharge Manifold .....................................c
12 Discharge Line ............................................d
13 Pipe Plug 1/2" .............................................a
14 Pipe Plug 1/8" .............................................a
15 Pipe Plug 1/16" ...........................................a
A Intake Manifold Mounting Flange
B Governor Mounting Flange
Comment Key:
a Provided with Compressor
b Part of SN3502 Kit
c Part of SN3711K Kit
d Order from Haldex
e Order from Engine Manufacturer
EL13060X
EL16060X
12
3
B
4
5
13
Comment