GB
Temperature-controlled wine cabinet
Dear Customer,
Before using the appliance, please read the following
instructions carefully and keep this manual for future reference.
The appliance must only be used by persons familiar with these
instructions.
Connection to the mains supply
∙ The appliance should only be connected to an earthed
socket installed in accordance with the regulations. Make
sure that the supply voltage corresponds with the voltage
marked on the rating label.
∙ This product complies with all binding CE labelling
directives.
∙ Do not operate this unit by means of a transformer or,
together with other electrical appliances, by means of an
extension cable.
∙ To prevent noise vibration, ensure that the power cord does
not touch any part of the rear of the unit (e.g. the heat-
exchanger).
General information
∙ This appliance is a compressor refrigerator designed for
cooling and storing wine only.
∙ Refrigeration appliances are classifi ed into certain climate
classes. Please refer to the product data sheet for
information on the classifi cation for this unit.
∙ This appliance is intended for domestic or similar
applications, such as
- in shops, offi ces and other similar working environments,
- in agricultural working environments,
- by customers in hotels, motels etc. and similar
establishments,
- in bed-and breakfast type environments.
∙ This appliance is not intended for commercial use, nor
for use in the catering business or similar wholesale
environments.
∙ No responsibility is accepted if damage results from
improper use, or if these instructions are not complied with.
Important safety instructions
∙ Before it is connected to the mains power, the unit
must be thoroughly checked for transport damage,
including its power cord. In the event of any such
damage being found, the appliance must not be
connected to the mains.
∙ In order to comply with safety regulations and to
avoid hazards, any repairs or modifi cations to this
unit must be carried out by our authorised service
personnel, including the replacement of the power
cord.
∙ Remove the plug from the wall socket
8
- in case of any malfunction,
- during cleaning,
- before maintenance or repair work is carried
out.
∙ To avoid the risk of electric shock, do not clean the
appliance with water and do not immerse it in water.
∙ The power cord should be regularly examined for any
signs of damage. In the event of such damage being
found, the appliance must no longer be used.
∙ This appliance may be used by children (at least 8
years of age) and by persons with reduced physical,
sensory or mental capabilities, or lacking experience
and knowledge, provided they have been given
supervision or instruction concerning the use of the
appliance and fully understand all dangers and safety
precautions involved.
∙ Children must not be permitted to play with the
appliance.
∙ Children must not be permitted to carry out any
cleaning or maintenance work on the appliance
unless they are supervised.
∙ The cooling circuit in this
appliance contains the
refrigerant isobutane (R600a),
a natural gas with a high level
of environmental compatibility,
which is nevertheless fl ammable. Ensure, therefore,
that none of the components of the refrigerant
circuit become damaged during transportation and
installation of the appliance. If damage to the cooling
circuit does occur, do not switch on or connect the
appliance to the mains power. If there should be
an open fi re or any other sources of ignition in the
vicinity of the refrigerant gas, make sure it is removed
immediately from the area and that the room is then
thoroughly ventilated.
∙ To prevent the risk of personal injury or damage to the
cabinet, the unit must only be transported while in its original
packaging. For unpacking and installation, 2 persons are
needed.
∙ Caution: Keep any packaging materials well away from
children: there is a risk of suffocation.
∙ Warning: Do not damage the cooling circuit. Any escaping