SEVERIN KS 9894 Instrucciones De Uso página 9

refrigerant causes damage to the eyes; there is also a
danger of the gas igniting.
∙ Warning: Keep the ventilation openings in the appliance
enclosure clear of obstruction. Suffi cient ventilation must be
ensured at all times.
∙ Warning: Do not use any external device (e.g. heaters
or heating fans) to accelerate de-frosting; follow only the
methods recommended in this manual.
∙ Warning: Do not operate any other electrical appliances
(e.g. ice makers) inside the cabinet.
∙ Caution: do not remove the cover of the interior LED
light. If there should be any malfunction, please contact the
customer service for assistance.
∙ To avoid the risk of fi re, do not place any thermo-electric
appliances on top of the unit. Do not place liquid containers
Familiarisation
1. Door hinge cover
2. Door hinge
3. Double-walled glass door
4. Power cord
5. Adjustable feet
6. Chrome-plated storage racks
7. Housing
8. Drain channel
9. Compressor
10. Interior lighting with On/Off switch
11. Temperature control
on top of the unit, to prevent any leaking or escaping liquid
damaging the electrical insulation.
∙ This appliance is designed for storing wine only.
∙ Do not lean or put undue weight on the shelves, door etc.
∙ Protect the inside of the wine cabinet at all times from open
fl ames and any other sources of ignition.
∙ When removing the plug from the wall socket, never pull on the
power cord; always grip the plug itself.
∙ We reserve the right to introduce technical modifi cations.
∙ If the unit is not used for an extended period of time, we
recommend keeping the door open.
∙ If the unit is sold, handed over to a third party or disposed of
at a suitable recycling facility, attention must be drawn to the
presence of the insulation agent 'cyclopenthane' as well as
to the refrigerant R600a.
Before using for the fi rst time
∙ Remove any exterior and interior packaging materials.
∙ Please ensure proper disposal of all packaging materials.
∙ Clean the unit according to the instructions given in the De-
frosting and cleaning section below.
∙ The unit should only be transported in its vertical position;
do not tilt any more than 30°.
∙ Once the unit has been positioned, wait for about 30
minutes before it is connected to the mains.
∙ If the unit has been tilted more than 30° during transport,
allow it to stand upright for at least 4 hours before it is
9