Adjust The Brakes; Adjusting Of The Footrests - Vermeiren V100 Manual De Instrucciones

3.5

Adjust the brakes

L
Risk of injury – Brakes may only be adjusted by your specialist
WARNING:
dealer.
Adjust the brakes according following rules:
2
3.6

Adjusting of the footrests

3.6.1 Length of the footrests
L
Risk of damage – Avoid that the footrests make any contact with the
CAUTION:
ground. Keep a minimum distance from 60 mm (2.36 in.) above the ground.
1
3.6.2 Adjusting the footplates
The footplates can be used in 2 positions. Standard they are adjusted with the base plate in
the back position.
The footplates can be adjusted to the front by switching the left and right footplate.
1. Install the wheels according § 2.2.
2. Disconnect the brakes by pulling lever
backwards.
3. Loosen the bolts
mechanism can slide over the guide
4. Pull the brake mechanism over the guide
the desired position.
5. Retighten the bolts .
6. Check working of the brakes.
3
7. If necessary repeat the above steps until the
brakes are adjusted well.
Adjust the length of the footrests as follow:
1. Remove the screw
footrests).
2. Adjust the length of the footrest to a comfortable
length.
3. Tighten the screw
Page 17


so the brake

.

(on the back of the

properly.
EN
V100
2011-01

to