MTD OEM-190-182A Manual Del Operador página 15

Note: For the chute elbow to be properly installed, the
bottom edge must fall over the bottom of the deck
opening. See Fig. 4-23.
Figure 4-23
12. Secure the chute elbow to the tractor's deck by hooking the
chute strap onto the ball pin installed earlier on the deck.
See Fig. 4-24.
Figure 4-24
13. Install the chute adapter onto the chute elbow by lining up the
tabs and sliding the adapter over the chute elbow, as in Fig.
4-25. Secure the chute adapter by installing the two ratchet
clips included in the hardware pack in the holes provided.
Figure 4-25
14. With the bagger cover open, install the upper chute over the
chute adapter, and rest the top so that the chute support
sits in the upper chute groove. See Fig. 4-26.
Note: Make sure to align the upper chute with the ridges
on the bagger support bracket.
Figure 4-26
s
ectiOn
4 — a & i
sseMbly nstallatiOn
15