Lorex LW2231 Manual De Instrucciones página 17

Installing the Camera
2 Loosen the thumbscrews (1, 2) and the adjustment ring (3) by turning them counter
clockwise.
3 Adjust the angle of the camera until the desired view is set. Tighten the thumbscrews and the
adjustment ring to secure the camera's position.
4 Connect the power cable from the camera to the weatherproof power connector. Plug the
power adapter into a power outlet or surge protector.
NOTE: Power cables are only weatherproof when fully inserted at the connection point.
Power cables may not be submerged in water.
5 Remove protective film from the camera lens to uncover the microphone. The protective
film may prevent the microphone from working if not removed.
6
1
2
3