Date & Time Set Procedure; Using The Talking Function - HoMedics BPA-250 Manual De Instrucciones

DATE & TIME SET PROCEDURE
1. To adjust the date/time, press the Set button
located on the back of the monitor.
2. The display will show a blinking number showing
the hour. Change the hour by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set button
to confirm the entry, and the screen will show a blink-
ing number representing the minutes.
3. Change the time and date as described in Step 2
above, using the
bers and the Set button
4. A "0" will reappear as the blood pressure monitor is
ready for measurement again.
repeat process to set time and date
again
button to change the num-
to confirm the entries.
Press the button
blinking hour
increasing hour
confirm the entry
13

USING THE TALKING FUNCTION

, 1. Select English or Spanish by pressing the
Language button labeled with an "L " and located on
the back of the monitor.
• "L1" will appear on the display for ENGLISH.
• "L2" will appear on the display for SPANISH.
L1=ENGLISH
2. Turn the talking feature on (or off) by pressing the
speaker on/off button located on the front of the
monitor.
L2=SPANISH
14