POLTI Vaporetto ECO POWER M0S10465 1T03 Manual De Instrucciones página 16

CARE OF YOUR VAPORETTO
• Before attempting any maintenance operation,
make sure to always disconnect the appliance
from the electrical outlet.
• To clean the body of the appliance, use a moist
cloth.
Regularly check the status of the green gasket
located on the central connector (4). If
necessary, replace the gasket with the spare
washers supplied (15).
Fig. B
- Remove the broken / damaged green gasket.
- Insert the new one. Put it on the steam nozzle
and push it till its seat. See (fig. B)
- Lubricate the gasket with some oil.
PROBLEM
The appliance can not switch
on
"Out of water" indicator light (J)
is on
VAPORETTO ECO POWER
TROUBLESHOOTING
Check that the lead is correctly plugged into a suitable electrical outlet.
Ensure that the appliance has been turned on using the ON/OFF switch
(B).
There is no water in the boiler.
Fill according to the instructions given in the manual.
14
Perform the same check on the connection black
gasket of the extension tubes (7) and the steam
gun (2).
Fig. C
- Remove the broken / damaged black gasket.
- Insert the new one. Put it on the steam nozzle
and push it till its seat. See (fig. C)
- Lubricate the gasket with some oil.
SOLUTION