Installation - S&P CAB ECOWATT PLUS Manual De Instrucciones

7.1. INSTALLATION

As shown in fi gure below, this accessory is an electronic component that must be installed inside the roof fan control box.
TIMER RTC ECOWATT
In order to do it correctly, follow these steps:
1. Disconnect power supply from the frontal ON/OFF switch
2. Open control box
3. Locate the J4 connector
4. Line up electronic component TIMER RTC ECOWATT with J4 connector pins
5. Fit the accessory pressing down
NOTE: Once installed, click twice the button on the console PROSYS ECOWATT to display date and time.
58