Use - Casselin CFRP1400 Manual De Instrucciones

WARNING
By operating the apparatus may reach high temperatures. To avoid burns and accidents, do not use
the machine malfunction and do not use spare parts that do not origins.
ELECTRICAL HAZARD
Risk from electrical current!
In case of improper installation, the device can be dangerous and cause injury. Before installation, check the
power system data. Connect the device only when there is compliance. The unit should be unpacked and
checked fully before connecting by a professional.

5.2 Use

WARNING
The establishment of the installation of the device and maintenance must be performed only by professionals.
• Do not leave the unit without monitor.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
COMMISSIONING
The unit must be completely removed from its packaging. All guards must be completely removed.
Place the machine upright on a solid, flat surface. Never place the device on a flammable surface.
Do not install the oven near open fires or other heating appliances.
It is prohibited to place on the device or in the distance less than 10 cm of the device flammable objects.
The safety distances for flammable materials according to their degree of flammability:
AT flammable granite, sandstone, concrete, brick, ceramic tile, coating.
B flammability: acumin, jefferson, lihnos, itaver.
C1 flammable evil wood of deciduous trees, against-plated, hardened paper, umakart.
C2 Average Flammability: chipboard, solodur, cork, rubber, coatings.
C3 easy flammability: boards of wood fiber, polystyrene, polyurethane, PVC.
The electric cable must be protected at least 16 amperes. The device must be plugged directly into a wall
outlet. Using a power strip will crack up the device.
When the apparatus is placed against a wall thereof is capable of withstanding a temperature of 60 ° C. If
that does not happen it is necessary to insert a protective layer.
Make sure that all openings for ventilation are not obstructed.
Thoroughly clean all parts of the device before use with a suitable product. The control box should not be in
water or contact with moisture.
Make sure the unit is placed so that the user has enough space to operate.
ELECTRICAL HAZARD!
Risk from electrical current!
The device can cause injuries in case of improper installation. Before installation, compare the local power
network with the instructions printed on the nameplate of the unit. Operate the machine only if there is
compliance. Observe safety rules.
Before connecting the appliance make sure the rated voltage and frequency listed on the data plate match
the values of the local electricity grid: the maximum voltage difference must be plus or minus 10%.
The appliance must be grounded.
Place the unit so that the plug is easily accessible to disconnect the unit if necessary.
EN