GENERGY DEVA 1 Instrucciones De Uso página 52

3 Once all of the fuel has been extracted, place the fuel cap in machine.
4 Start normally the engines (remember the pump end need water) to it aspire
totally the fuel place in carburetor.
5 Remove the spark plug (chapter 9.3) and pour a tsp of clean motor oil (5 ~ 10 ml)
in the cylinder. Pull the startup handle gently, this will make the engine spin and
distribute the oil. Then install the spark plug again.
6 Pull the starter rope slowly until you feel resistance. In this point, the piston is
rising in its compression stroke and the intake and exhaust valves are closed.
This position helps protecting the engine against internal corrosion in long
inactivity periods.
22