Dremel 9100 Instrucciones De Funcionamiento Y Seguridad página 18

2610Z04970.qxp_9100 1/30/17 10:59 AM Page 18
3. Apply the brush to the work in such a way
that as much of the brush face as possible
is in full contact with the work. Applying
the side or edge of the brush to the work
will result in wire breakage and shortened
brush life.
Polishing Accessories
These include an impregnated polishing
point and an impregnated polishing wheel for
bringing metal sur faces to smooth finish; a
felt polishing tip and felt polish ing wheel, and
cloth polishing wheel, all used for polishing
plastics, metals, jewelry and small parts.
Also included in this group is a polishing
compound (No. 421) for use with the felt and
cloth polishers.
Polishing points make a very smooth
surface, but a high luster is obtained using
felt or cloth wheels and polishing compound.
For best results polishing accessories
should be used at speeds not greater
than 15,000 RPM.
No polishing compound is needed when
using the 425 Polishing Wheel.
Aluminum Oxide Abrasive Wheels
Use to remove paint, deburr metal, polish
stainless steel and other metals. Available in
medium grit. 1/8" shank.
Sanding Accessories
Sanding discs in fine, medium and coarse
grades are made to fit mandrel No. 402 and
EZ407. They can be used for nearly any
18
small sanding job you might have, from
model making to fine furniture finish ing. In
addition, there is the drum sander, a tiny
drum which fits into the Rotary Tool and
makes it possible to shape wood, smooth
fiberglass, sand inside curves and other diffi -
cult places, and other sanding jobs. You
replace the sanding bands on the drum as
they become worn and lose their grit. Bands
come in fine medium and coarse grades.
Flapwheels grind and polish flat or contoured
surfaces. They are used most effectively as a
finishing sander after heavier surface
sanding and material removal is completed.
Flapwheels come in fine and coarse grades.
Buffs are a great finishing accessory for
cleaning and light sanding. They work
effectively on metal, glass, wood, aluminum
and plastics. Coarse and medium buffs are
sold together. All buffs are sold individually.
Do not exceed 15,000 RPM in speed. 1/8"
shank.
Grinding Wheel
Use for deburring, removing rust, and general
purpose grinding. Use with Mandrel #402.
Cutting Wheels
These thin discs of emery or fiberglass are
used for slicing, cutting off and similar
operations. Use them for cutting off frozen
bolt heads and nuts, or to reslot a screw
head which has become so damaged that
the screwdriver won't work in it. Fine for
cutting BX cable, small rods, tubing, cable
and cutting rectangular holes in sheet metal.