When Connecting To Separately Sold Power Amp - Pioneer AVH-P5000DVD Manual Del Instalacion

Connecting the Units

When connecting to separately sold power amp

The pin position of the ISO connector will
differ depending on the type of vehicle.
Connect 6* and 7* when Pin 5 is an antenna
control type. In other types of vehicles, never
connect 6* and 7*.
7
This product
Blue/white
Connect to system control terminal of the power
amp (max. 300 mA 12 V DC).
Blue/white (6*)
Rear output or subwoofer output
(REAR/SUBWOOFER/DEQ OUTPUT)
15 cm
Front output
(FRONT OUTPUT)
15 cm
Blue/white (7*)
Connect to auto-antenna relay control terminal
(max. 300 mA 12 V DC).
When you connect the separately sold multi-
channel processor (e.g., DEQ-P6600) to this
unit, do not connect anything to the speaker
leads and system remote control
(blue/white).
When you connect the multi-channel
processor to this unit, refer to multi-channel
processor's installation manual for the
connection method.