Kobalt SGY-AIR223 Manual Del Usuario página 11

ASSEMBLY INSTRUCTIONS
3. Place 2 - 3 drops of air tool oil
(not included) into the male plug before
each use (See Figure 3).
4. To attach the sanding pad (B), turn the
spindle lock (G) using a flathead
screwdriver or your fingers 1/4 inch
counterclockwise. The ARROW on the
knob will be pointing to the word "LOCK"
and the spindle lock shaft will pop out
(See Figure 4). Screw the sanding pad into
the crank shaft (C) by spinning the sanding
pad clockwise. Ensure to tighten properly
(See Figure 5).
Only use sanding pads that have an RPM
rating to or greater than the tool itself. Before
using tool, always make sure attachments
are properly secured. If attachments are not
properly secured, they can present a serious
hazard and may cause bodily injury for the
operator or anyone in or around the work
area. Always follow the attachment
manufacturer's specifications for properly
attaching accessories to tool.
WARNING
3
4
5
B
C
11
G
G
LOCK
G