Operating Instructions - Kobalt SGY-AIR223 Manual Del Usuario

ASSEMBLY INSTRUCTIONS
5. After attaching the sanding pad, push in
the spindle lock (G) using a flathead
screwdriver or your fingers and turn the
knob 1/4 inch clockwise. The ARROW on
the knob will be pointing to the word
UNLOCK. The sander is now ready to be
used (See Figure 6).
WARNING Starting the sander while the
spindle lock (G) is in the LOCK position
may damage the locking mechanism.
If this happens, you may not be able to
remove the sanding pad.
6. Connect air supply hose to the male plug.
Set the working pressure at 90 PSI for
best tool performance (See Figure 7).
NOTE Working pressure refers to the air line
pressure set to tool when tool is under
working conditions.

OPERATING INSTRUCTIONS

1. To start the tool, press down on the
trigger lever (E) (See Figure 1).
6
7
1
12
G
G
B
E
D