jbc DM 6700 Manual Del Usuario página 4

ENGLISH
JBC HANDPIECES RANGE
All the JBC
handpieces can be connected to the
DM 6700 station.
For a soldering handpiece to work
properly, the following components are
required: a control unit, a handpiece
and the corresponding stand and
cartridge.
These articles are not included with the
station and are
accessories.
The soldering iron is connected to the
station in the following way:
The cable connection of the soldering
iron is connected to the plug in the
soldering iron stand and the cable
connection of the soldering iron stand
can be connected to any of the two
connectors at the back of the station.
There is a diagram of the connection
on the device.
HOT TWEEZERS
DM 6700 station allows you to connect
two different models of tweezers,
each one with its respective range of
cartridges and stand:
- PA 1200 micro hot tweezers ref.
1200000.
- PA 4200 hot tweezers ref. 4200000.
For tweezers to work properly, the
following components are required:
control unit, hot tweezers, a stand and
a set of cartridges corresponding to
the chosen tweezer.
The tweezers are connected to the
station in the following way:
The cable connector from the tweezers
is plugged into the connector on the
stand. The cable connector on the
stand can be connected to any of the
two connectors at the back of the station.
There is a diagram of the connection on
the device.
series soldering
available as
AD 8210
Ref.0788210
2210
Ref.2210000
Cartridges
2210
PA 8120
Ref. 0748120
PA 4200
Ref. 4200000
Cartridges
for the PA 4200
hot tweezers
3
2245
Ref.2245000
Cartridges
2245
PA 1200
Ref. 1200000
1200
cartridges
AD 8245
Ref.0788245
PA 8110
Ref. 0748110