jbc DM 6700 Manual Del Usuario página 5

DR 5650 DESOLDERING IRON
DM 6700 station allows you to connect the
DR 5650 desoldering iron Ref. 5650000 by
adding the MS 9014 electric desoldering
pump Ref. 9014000 or the MS 9015 air
pressure desoldering system Ref. 9015000.
Electric desoldering pump
MS 9014 Ref.9014000
Air pressure desoldering system
MS 9015 Ref.9015000
DR 8500
desoldering iron stand
Ref.0788500
DR 5650
desoldering iron
Ref.5650000
For the desoldering iron to work properly, the
following components are required: the control
unit, the desoldering iron, a desoldering
pump module and the DR 8500 stand.
These articles are not included with the station.
The desoldering iron is connected to the
station following the below procedure:
Connect the cable connection from the
desoldering iron to the plug in the DR 8500
desoldering iron stand, connect the vacuum
hose to the desoldering air filter of the
desoldering pump module.
The cable connection of the desoldering iron
stand can be connected to any of the two
connectors at the back of the station and the
cable connection of the desoldering pump is
connected to the plug "Desoldering pump".
4
ENGLISH