Chronos Manufactures R-12400 Fastpace Manual De Instrucciones página 10

Instruction manual Instruction manual
Initial setting
Wind up your watch at least 40 times until the second hand starts to run before
wearing it for the first time.
Date setting
Pull the crown carefully to position 2 and set the time, e.g. at 7 o´clock by turning
the crown clockwise. Push the crown back to position 1 and set the date by turning
the crown counter-clockwise. Press pusher A to set the weekday. Press pusher B to
set the month. For months with less than 31 days, the date must be set manually
at the end of the month. The month must also be set manually at the end of each
month.
Time setting
Pull the crown to position 2 and set the current time by turning the crown clockwi-
se. Once finished push the crown carefully back into place.
Modell: R-12400 Fastpace
Automatic movement
calibre RK008 - 20 jewels
IMPORTANT ADVICE: Do not press any
pushers to set the day of the week or
the month between 8pm and 4 am. The
date changing mechanism is active at
this time and any exterior intervention
can damage the movement! Please
press the button on your watch slowly
and carefully to avoid damaging the
mechanism. When the warranty of your
watch expires, we recommend you to
send it in for a revision to ensure its
longevity. A revision should optimally
be conducted once a year to counteract
general wearout and to maintain the
water-resistance of your watch.