Chronos Manufactures R11700 Apia Manual De Instrucciones página 10

Instruction manual Instruction manual
Initial setting
Wind up your watch at least 40 times until the second hand starts to run before
wearing it for the first time.
Date setting
Pull the crown carefully to position 2 and set the time, e.g. at 7 o´clock by turning the
crown clockwise. Press pusher A to set the weekday. Press pusher B to set the day of
the month. For months with less than 31 days, the date must be set manually at the
end of the month.
Time setting
Pull the crown to position 2 and set the current time by turning the crown clockwise.
Once finished push the crown back completely. Therefore you will firstly get the
crown to position 1, then carefully rotate the crown and push the crown further back
to place. The eye above the 6 shows the actual time on a 24 hour format. The small
hands on the eye move along with the big hands.
Model: R11700 Apia
Automatic movement
Calibre RK016 - 20 jewels
Important advice: Do not press any
pushers to set the day of the week or
the month between 8 pm and 4 am. The
date changing mechanism is active at
this time and any exterior intervention
can damage the movement! Please
press the button on your watch slowly
and carefully to avoid damaging the
mechanism. When the warranty of your
watch expires, we recommend you to
send it in for a revision to ensure its
longevity. A revision should optimally
be conducted once a year to counteract
general wearout and to maintain the
water-resistance of your watch.