Operate Washing Machine
Features
1.Power-off memory: In case of power failure during the cycle, the settings
will be saved, and operation will resume when the power is restored.
2.Child lock: Press the "Temperature" and "Spin" button simultaneously for 3
seconds can activate or cancel the "Child lock"feature to avoid mis-
operations. When the feature is activated, all buttons cannot be set until the
operation is over or it is canceled.
3.Spray: Water can be sprayed to the door and viewing window with detergent.
It can clean foam more effect and improve the washing efficiency with less
water consumption.Some series washers may not have this feature.
4.Unbalance protection: When the machine is ready to spin, The washer
may take a few time to balance clothes due to great unbalance. If clothes
is still unbalance in the drum after that, the spinning speed can be slow
down to avoid great vibration. If clothes in drum is too less, the machine
may not to spin due to the unbalance protection, then you should add
more clothes in the machine to make it to spin.
5.Reload:If you want to add clothes in the washer during the procedure,
press the "Start/Pause" button for 3s,when you sound two beeps, it
means the reload feature has been activated. Please wait for the
indicator ' ' disappears then open the door. Press the "Start/Pause"
button to resume the procedure after reload.
15