Correcting Distorted Sound; Resetting The Audio Functions; Switching The Sound Muting/Attenuation; Setting The Internal Power Amplifier - Pioneer DEH-P88RS Manual De Instrucciones

Ocultar thumbs Ver también para DEH-P88RS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Initial Settings

Correcting distorted sound

When listening to a CD or other source on
which the recording level is high, setting the
equalizer curve level to high may result in dis-
tortion. You can switch the digital attenuator
to low to reduce distortion.
! Sound quality is better at the high setting
so this setting is usually used.
1
Use MULTI-CONTROL to select
Digital ATT.
Digital ATT appears in the display.
2
Press MULTI-CONTROL to select the di-
gital attenuator level.
Pressing MULTI-CONTROL repeatedly will
switch between High (high) and Low (low)
and that status will be displayed.

Resetting the audio functions

You can reset all audio functions.
1
Use MULTI-CONTROL to select
Audio Reset.
Reset OK! appears in the display.
2
Press MULTI-CONTROL.
Does it RESET? appears in the display.
3
Push MULTI-CONTROL right.
Are you sure? appears in the display.
4
Press MULTI-CONTROL to reset audio
functions.
Complete appears in the display and audio
functions are reset.
# To cancel this function on the way, press
BAND.
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
! The sound is muted or attenuated, MUTE
or ATT are displayed and no audio adjust-
ment is possible.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1
Use MULTI-CONTROL to select Mute.
Mute appears in the display.
2
Press MULTI-CONTROL to select the de-
sired setting.
Press MULTI-CONTROL repeatedly to switch
between the following settings:
! 10dB ATT – Attenuation
! 20dB ATT – Attenuation (20dB ATT has a
stronger effect than 10dB ATT)
! TEL mute – Muting
Setting the internal power
amplifier
This unit features high power amplifier. How-
ever, in particular system, external amplifiers
are used instead of internal amplifier. If you
use external amplifiers in order to establish a
multi-amp system, and don't use internal am-
plifier, it is recommended to turn off the inter-
nal amplifier. Turning off internal amplifier
reduces the noise that comes from the beha-
vior of internal amplifier and fan.
1
Use MULTI-CONTROL to select
Internal AMP.
Internal AMP appears in the display.
Section
13
73
En

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido